Metal Buildings in Asheville, NC — METCO Metal Building Supply
Asheville NC · Buncombe County · Western North Carolina

Metal Buildings in Asheville, NC

METCO Metal Building Supply has no sales lot in Asheville or Buncombe County. The nearest METCO lot is Inman, SC, about 45 miles down I-26, followed by Easley, SC at about 53 miles and Pelzer, SC at about 64. Asheville sits inside the 100-mile radius of all three, so delivery and installation are free for addresses in Asheville, Weaverville, Black Mountain, Arden and Fletcher. The buildings that make the most sense here are RV covers and garages that can carry a real mountain snow load, and METCO offers certified engineered drawings for wind and snow wherever Buncombe County requires them.

Get a Free Quote →📞 (252) 375-3651

Nearest lot: Inman, SC, about 45 miles

6855 Hwy 9, Inman, SC 29349, phone (864) 216-8670, down I-26 from Asheville.

Snow-load drawings available

Certified engineered drawings for wind and snow where Buncombe County requires them.

12-gauge framing for exposed sites

Galvanized 14-gauge standard; 12-gauge on request for ridgeline and high-elevation lots.

RV covers with 12' legs

Leg heights 9' to 12' clear Class A motorhomes with roof units.

Free delivery to Asheville

Buncombe County is inside the 100-mile free delivery and installation radius.

No builder required

METCO manufactures, delivers and erects the shell; you prepare the pad and handle finish-out.

Nearest METCO lots to Asheville, NC

All 28 lots: metcometal.com/locations · open Mon–Sat 9am–5pm

Which METCO lot is closest to Asheville, and is the drive worth it?

None of METCO's 28 lots is in Asheville, so the honest answer is that you are looking at a drive down the mountain or a phone call. The closest lot is Inman, SC, at 6855 Hwy 9, Inman, SC 29349, phone (864) 216-8670, about 45 miles from Asheville by I-26 through Saluda and Landrum. Easley, SC, at 4314 Calhoun Memorial Hwy, Easley, SC 29640, is about 53 miles and is reached through METCO's main line at (252) 375-3651. Pelzer, SC, at 9491 Augusta Rd, Pelzer, SC 29669, phone (864) 745-5427, is about 64 miles. All lots are open Monday through Saturday, 9am to 5pm. The drive is worth it if you want to talk through leg height, gauge and door placement face to face before choosing; otherwise the 3D designer at /builder/ and a phone quote get the same building to your driveway. Every lot is listed at /locations/.

What does an RV cover need to survive a Blue Ridge winter?

An RV cover in Asheville is not the same purchase as one in the Piedmont. Elevation runs from roughly the French Broad valley floor up to ridgelines around Black Mountain and Weaverville, and roofs up high carry snow for weeks. Start with leg height: METCO offers 9 to 12 feet, and a 12-foot leg clears a Class A with roof-mounted air units. Then look at framing. Standard framing is galvanized 14-gauge, and 12-gauge is available and is the sensible choice on an exposed mountain site. A vertical-roof style sheds snow and rain off the ends instead of letting it sit. Whether Buncombe County requires certified wind and snow load drawings for a cover of your size varies by county and can change, so ask; METCO tells you before purchase whether your site needs certification and supplies the engineered drawings when it does.

How does METCO install a garage on a steep Buncombe County lot without a builder?

METCO manufactures the 29-gauge panels at its Farmville, NC plant, delivers the building and sends METCO to erect it, so there is no contractor to line up for the shell. On mountain ground, the site is the hard part and it is on your side. The pad or slab has to be level, and a delivery truck has to reach it, which on a switchback driveway off Reems Creek or a hollow near Fairview may mean checking clearance and turning room before you order. A cut-and-fill pad with a retaining edge is common on sloped lots; a concrete slab is the usual base for a garage. Once the steel arrives the shell usually stands within days. Wiring, insulation and interior walls are done afterward by your own trades, and that finish-out is what turns a days-long install into a months-long project.

What decides the quote on a metal building delivered to Asheville?

METCO does not publish a price list because quotes track steel pricing on the day they are written. The drivers are the building's width and length, leg height, 14-gauge versus 12-gauge framing, whether certified drawings are required at your site, the number of doors and windows, and roof style. On a mountain lot, site work often matters as much as the steel: grading, a retaining edge, gravel or a slab and driveway access are all yours to arrange and are not in METCO's number. Finish-out is separate too. To get a quote, call the Inman lot at (864) 216-8670 or METCO's main line at (252) 375-3651, or design the building at /builder/; written quotes usually come back within 24 hours. Rent-to-own with no credit check is available on qualifying buildings, and delivery and installation to Asheville are free.

Can a metal shop or barn work on a Western North Carolina farm or homestead?

Yes, and the same clear-span frame that makes an RV cover makes a shop or barn. METCO builds from 12 feet to 60 feet wide with no interior posts, which suits the tractor-and-hay barns around Leicester and Alexander and the woodworking or mechanic shops that Asheville side businesses run out of a back lot. Galvanized framing does not rot in the damp coves the way wood posts do, and a 12-foot leg gives room for a loader or a lift. Open-sided equipment covers, partially enclosed barns and fully enclosed shops all come from the same panel and framing system, so an open-sided cover and a fully enclosed shop are specified the same way, wall by wall. Snow load applies to a barn just as it does to a cover, so engineered drawings for wind and snow are available where Buncombe or a neighboring county requires them.

Specifications

Lot address
No lot in Asheville; nearest is 6855 Hwy 9, Inman, SC 29349
Phone
Inman lot (864) 216-8670 · METCO main (252) 375-3651
Hours
Mon–Sat 9am–5pm at every METCO lot
Nearest lots
Inman, SC (45 mi) · Easley, SC (53 mi) · Pelzer, SC (64 mi)
Widths
12' to 60' clear-span, leg heights 9'–12'
Panels
29-gauge, roll-formed at METCO's Farmville, NC plant
Delivery
Free delivery and installation within 100 miles; Asheville qualifies

Common Questions

Where is the closest METCO lot to Asheville?

Inman, SC, about 45 miles south on I-26, at 6855 Hwy 9, Inman, SC 29349, phone (864) 216-8670. Easley, SC is about 53 miles and Pelzer, SC about 64. METCO has no lot in Asheville or Buncombe County, but all three lots deliver and install here for free.

Does a metal RV cover in Asheville need a snow-load rating?

Whether a certified snow and wind load drawing is required depends on Buncombe County's current rules and the size of the cover, and those rules vary by county. METCO checks your site before purchase, tells you if certification is needed, and supplies the engineered drawings when it is.

Can METCO's truck get up a steep mountain driveway?

It depends on grade, turning room and overhead clearance. Tell METCO about the driveway when you request the quote, and clear low limbs and soft spots before delivery. The pad itself has to be level and reachable; that part is the customer's responsibility.

Is delivery free to Weaverville, Black Mountain and Hendersonville?

Yes. All of Buncombe County and neighboring Henderson County fall inside the 100-mile free delivery and installation radius from the Inman, SC lot, so Weaverville, Black Mountain, Arden, Fletcher and Hendersonville pay nothing extra.

Should I choose 12-gauge framing for a building above Asheville?

For an exposed ridgeline or high-elevation site, 12-gauge is the heavier option and is often the right call for snow and wind. Standard 14-gauge galvanized framing serves most valley sites. Framing gauge is one of the main drivers of the quote, so ask METCO to price both.

How do I get a quote without driving to South Carolina?

Build the cover or garage in the 3D designer at /builder/ or call (252) 375-3651 with the dimensions, leg height and door layout. METCO returns a written quote from current steel pricing, usually within 24 hours.

Get a Real Number in 24 Hours

Tell us the size, your county and what you are storing. We quote from current steel pricing — no obligation, and we will tell you if a different size suits you better.

Request a Quote →Design It in 3D