Metal Buildings in Rock Hill, SC — METCO Metal Building Supply
Rock Hill SC · York County · South Carolina Piedmont

Metal Buildings in Rock Hill, SC

METCO Metal Building Supply does not have a sales lot inside Rock Hill, and this page says so up front. The closest METCO lot is Union, SC, about 38 miles west by way of SC 49; Richfield, NC is about 57 miles and Inman, SC about 58. All three sit inside the 100-mile radius where METCO delivers and installs for free, so a two-car metal garage for a Rock Hill, Fort Mill, Tega Cay or York address costs nothing extra to bring in. METCO roll-forms the 29-gauge panels itself, delivers them and erects the shell .

Get a Free Quote →📞 (252) 375-3651

Nearest lot: Union, SC, about 38 miles

220 Duncan Bypass, Union, SC 29379, phone (864) 426-2377, open Mon–Sat 9am–5pm.

Free delivery to Rock Hill

York County is inside the 100-mile free delivery and installation radius of three METCO lots.

Two-car garages from 24' wide

Clear-span to 60' with no interior posts; leg heights 9' to 12'.

No builder required

METCO manufactures, delivers and erects the shell; your trades do the finish-out.

Certification decided up front

METCO tells you before purchase whether York County will need engineered drawings for your site.

Quote from current steel pricing

Written quote usually within 24 hours; no published price list, just the day's steel.

Nearest METCO lots to Rock Hill, SC

All 28 lots: metcometal.com/locations · open Mon–Sat 9am–5pm

Is there a METCO lot in Rock Hill, and which lot serves York County?

There is no METCO lot in Rock Hill or anywhere in York County. The nearest is the Union, SC lot at 220 Duncan Bypass, Union, SC 29379, phone (864) 426-2377, about 38 miles from Rock Hill by way of SC 49 through York and Lockhart. Two others are within reach: Richfield, NC at 321 A W Church St, Richfield, NC 28137, phone (704) 463-1802, about 57 miles, and Inman, SC at 6855 Hwy 9, Inman, SC 29349, phone (864) 216-8670, about 58 miles. Every lot is open Monday through Saturday, 9am to 5pm. Rock Hill is well within 100 miles of all three, which is the radius for free delivery and installation, so where you shop is a matter of which drive suits you. You can also skip the drive, design the building at /builder/ and get a quote by phone. The full lot list is at /locations/.

What does a two-car metal garage for a Rock Hill subdivision lot look like?

Garages are the natural fit for a Rock Hill subdivision lot, usually a detached two-car or a garage-plus-workshop behind a house in a neighborhood off Celanese Road, Dave Lyle Boulevard or out toward Lake Wylie. A clear-span METCO garage has no interior posts, so a 24-foot-wide building fits two vehicles side by side with wall space left for shelving, and a 30-foot width adds a bay for a mower or a boat. Leg heights run 9 to 12 feet; pick 10 feet or more if a truck with a rack or a lifted vehicle is going in. Panels are 29-gauge steel, framing is galvanized 14-gauge with 12-gauge available, and roll-up doors, walk doors and windows are placed to suit the lot. If your neighborhood has an HOA, ask about exterior color and roof style rules before you finalize, because those are easy to match at order time and hard to change after.

How does Piedmont clay around Rock Hill affect the pad under a metal building?

York County sits on the Carolina Piedmont, and the red clay that shows up in every dug hole from Rock Hill to Fort Mill to York holds water in winter and shrinks hard in a dry August. A metal building does not care about the clay itself, but the pad does. Grade the site level, compact it, and slope the surrounding ground so runoff moves away rather than pooling against a garage wall or under a carport. A concrete slab is the usual base for a garage with a lift or a finished floor; a compacted gravel pad works for carports, RV covers and equipment storage. METCO's crew anchors the building to whichever base you have prepared. Whether York County requires a permit or engineered wind and snow drawings for your building depends on its size and use, varies by county and can change, so ask the county early; METCO tells you before purchase whether your site needs certification.

What makes one Rock Hill metal garage quote higher than another?

METCO does not publish prices, because each quote is built from steel pricing on the day it is written. Six things move the number: footprint, leg height, framing gauge, whether certified engineered drawings are required at your site, the door and window package, and the roof style. Two more sit on your side of the ledger and are not in METCO's quote: site preparation with a slab or pad, and finish-out such as wiring, insulation and drywall, which your own trades handle after the shell is up. To get a written quote, call the Union lot at (864) 426-2377 or the main line at (252) 375-3651 with your rough dimensions, or design the garage at /builder/ and submit it, and a written quote usually follows within 24 hours. Qualifying buildings can be taken rent-to-own with no credit check.

Specifications

Lot address
No lot in Rock Hill; nearest is 220 Duncan Bypass, Union, SC 29379
Phone
Union lot (864) 426-2377 · METCO main (252) 375-3651
Hours
Mon–Sat 9am–5pm at every METCO lot
Nearest lots
Union, SC (38 mi) · Richfield, NC (57 mi) · Inman, SC (58 mi)
Widths
12' to 60' clear-span, leg heights 9'–12'
Panels
29-gauge, roll-formed at METCO's Farmville, NC plant
Delivery
Free delivery and installation within 100 miles; Rock Hill qualifies

Common Questions

Where is the closest METCO lot to Rock Hill?

Union, SC, about 38 miles west at 220 Duncan Bypass, Union, SC 29379, phone (864) 426-2377. Richfield, NC (321 A W Church St, about 57 miles) and Inman, SC (6855 Hwy 9, about 58 miles) are the next closest. There is no METCO lot in Rock Hill itself.

Does METCO charge for delivery to Rock Hill or Fort Mill?

No. Delivery and installation are free within 100 miles of any METCO lot, and Rock Hill, Fort Mill, Tega Cay, York, Clover and Lancaster are all inside that radius from the Union, SC lot.

Can I buy a metal garage for Rock Hill without driving to Union?

Yes. Design the garage in the 3D builder at /builder/ or call (252) 375-3651 with your size, leg height and door layout. METCO returns a quote based on current steel pricing, usually within 24 hours, and the building is delivered and installed at your Rock Hill address.

Do I need a permit for a detached metal garage in York County?

Permit requirements vary by county, by the building's size and by its use, and they change, so confirm with York County before you order. METCO will tell you before purchase whether your site needs certified wind and snow load drawings and can supply them where required.

Will a METCO garage match my Rock Hill HOA's rules?

Panel colors, roof styles and door layouts are chosen at order time, so most exterior requirements can be met. HOA rules vary from one neighborhood to the next, so bring your covenants to the quote and confirm the finish before the building is manufactured.

How soon after delivery is the garage usable?

METCO's crew usually has the shell standing within days of delivery. If you plan to wire, insulate or finish the interior, that work is done afterward by your own trades and is what turns a days-long install into a longer project.

Get a Real Number in 24 Hours

Tell us the size, your county and what you are storing. We quote from current steel pricing — no obligation, and we will tell you if a different size suits you better.

Request a Quote →Design It in 3D