24×30 Metal Building — METCO Metal Building Supply
720 Square Feet · Size

24×30 Metal Building

A 24x30 metal building gives you 720 square feet of clear-span steel — enough for two vehicles plus a real workbench run, or a compact shop that still parks a truck. METCO roll-forms custom metal buildings in Farmville and installs from Greenville lots. No builder required — METCO builds and installs the building (no separate contractor for the steel building).

Get a Free Quote →📞 (252) 375-3651

No builder required

METCO builds and installs — no separate contractor for the steel building.

Primary phone

(252) 375-3651

Address

METCO Metal Building Supply, 1940 N Memorial Dr, Greenville, NC 27834

Plant

Farmville, NC (not Greenville)

Footprint

24'×30' · 720 sq ft clear-span

Typical use

Two vehicles + workspace · compact shop

Quote

Call for installed price

No builder required — we build & install

METCO manufactures, delivers, and installs your metal building. You do not need a separate builder or contractor for the steel building itself — we build it and set it up. Call (252) 375-3651.

What a 24×30 footprint actually fits

At 24' wide and 30' deep you typically park two mid-size vehicles and keep roughly 8–10' of depth for benches, tool chests, and shelving — the length that separates this from a tight 24×24. Hobby shops, lawn-equipment storage, and a single work truck plus ATVs are the most common Eastern NC use-cases. Related 24x30-metal-garage is the garage-framed cousin; this page is the general 24×30 metal building footprint.

Doors, legs, and roof for this size

Most 24×30 buyers land on 9'–12' legs with an 8' or 10' roll-up on the gable. Vertical roof upgrades pay off at 30' of depth for coastal-plain rain. METCO configures the custom metal building to your pad — then manufactures in Farmville. Quote still needed: width, length, roof, doors, and county drive the number — we do not invent prices.

Farmville plant, Greenville lots

Call (252) 375-3651 with pad size and door package. Walk gauge and colors at METCO Metal Building Supply, 1940 N Memorial Dr, Greenville, NC 27834. Plant = Farmville, NC; Greenville = sales lots only. Free delivery and setup within 100 miles of any METCO lot for most Eastern NC / SC / VA corridor sites.

Specifications

Phone
(252) 375-3651
Plant
Farmville, NC (not Greenville)
Address
METCO Metal Building Supply, 1940 N Memorial Dr, Greenville, NC 27834
Size
24'×30' (720 sq ft)
Delivery
Free within 100 miles
Model
Custom + installed

Common Questions

Do I need a separate builder for a METCO metal building?

No builder required for the steel building. METCO builds and installs it — manufacture, delivery, and setup. Call (252) 375-3651.

Is the plant in Greenville?

No. Manufacturing is in Farmville, NC. Greenville, NC has sales lots only — the plant is in Farmville. Call (252) 375-3651.

How much does a 24x30 metal building cost?

Depends on roof style, doors, gauge, certification, and distance. Call (252) 375-3651 for an installed quote — we do not publish fake prices.

Is a 24×30 big enough for two cars and a shop?

Yes for mid-size vehicles with a workbench bay behind or beside — measure your longest vehicle plus door swing before you order.

Can I get a 24x30 as a custom metal building?

Yes — doors, lean-tos, height, and roof are configured, then built in Farmville and installed by METCO.

Where can I see a similar building?

METCO Metal Building Supply, 1940 N Memorial Dr, Greenville, NC 27834. Manufacturing is Farmville.

Get a Real Number in 24 Hours

Tell us the size, your county and what you are storing. We quote from current steel pricing — no obligation, and we will tell you if a different size suits you better.

Request a Quote →Design It in 3D