How to Avoid Scams When Hiring a Metal Building Contractor β€” METCO Metal Building Supply
Guide Β· Buyer Protection Β· NC Β· SC Β· VA

How to Avoid Scams When Hiring a Metal Building Contractor

Most metal building purchases go exactly as promised. The ones that do not tend to share a pattern: a large deposit paid on a handshake, a scope that lived in a phone call, a crew nobody could name, and paperwork that never showed up. You do not need to be suspicious of everyone to protect yourself; you need a short list of checks that any legitimate company can pass in an afternoon. This guide gives you those checks, explains what each one proves, and describes the contract terms that keep your money tied to steel actually arriving on your pad.

Short answer

Avoid metal building contractor scams by verifying rather than trusting: confirm any required license with the state board, check a current insurance certificate with the insurer, insist on a written scope with every door and gauge listed, tie payments to delivery and completed installation rather than a large upfront deposit, and collect lien waivers at final payment.

Get a Free Quote β†’πŸ“ž (252) 375-3651

License lookup

Where required, confirm the number with the state board directly, not from the contractor's paperwork.

Insurance certificate

Call the insurer or agent on the certificate to confirm liability and workers' comp are current.

Written scope

Size, gauge, color, every door and window, anchoring, drawings and installation on one signed page.

Deposit terms

Modest deposit, balance at delivery and completed installation, refund terms written down.

Engineered drawings

Ask the county yourself whether certification is required; do not rely on a salesperson's word.

Lien waivers and records

Collect waivers at final payment and keep drawings, permits, inspections and receipts together.

What can I verify before I hand over any money?

Start with identity. Get the legal business name, physical address and phone, and confirm the address is real; a manufacturer should have a plant you can visit and a dealer should have a lot where buildings stand. Where your state requires a contractor license for the size or type of work, ask for the number and look it up with the licensing board yourself. Ask for a certificate of insurance showing general liability and workers' compensation, then call the insurer or agent listed on it to confirm it is current; a certificate is a piece of paper and only the issuer can validate it. Ask who installs and whether they are employees or subcontractors. Ask for recent installations in your county you can drive past. None of this takes long, and a company that does this every week will have it ready. Hesitation on any item is your signal.

What should the written agreement contain?

A scope you could hand to a stranger and have them build the same building. That means width, length, leg height, roof style, framing gauge, panel gauge, color, trim, every door and window by size and location, anchoring method, whether certified engineered drawings are included, the delivery address, and a statement that installation is included. It means a price that is fixed for a stated period, a change-order policy, and a delivery window. It means payment terms: the deposit amount, what it is refundable against, and when the balance is due. It means what happens if the county denies the permit. And it means signatures from both parties on the same document. Verbal add-ons are not part of the deal. If a salesperson promises something, ask them to write it on the agreement and initial it. A written scope protects the honest contractor as much as it protects you.

How should payments be structured to protect me?

Tie money to things you can see. A modest deposit that secures fabrication is normal; a demand for most or all of the price before anything is delivered is one of the biggest warning signs in the industry. Ask for the balance to fall due at delivery and completed installation, after you have walked the building and checked doors, trim and anchors. Pay by a method that leaves a record. At final payment, ask for a lien waiver from the installer and any subcontractor so nobody can later claim against your property for work you already paid for. If rent-to-own is offered, read the whole agreement: the payment schedule, the buyout terms, what constitutes default, and whether the building can be removed. METCO offers rent-to-own with no credit check on qualifying buildings, manufactures the panels itself and installs the building with no separate contractor, which keeps the money and the accountability in one place.

What are the red flags worth walking away from?

Pressure to sign today because the price expires tonight. A deposit demanded in cash or by a method with no record. No physical address, or an address that turns out to be a mailbox. A license number that does not match the licensing board's record, or an insurance certificate the insurer cannot confirm. A scope that will not be put in writing, or a quote that omits gauge, doors or installation. A refusal to say who manufactures the steel or who installs it. A claim that your county never requires permits or engineered drawings, when the inspections office says otherwise. A delivery date that keeps moving after payment. Any one of these has an innocent explanation sometimes; two or three together do not. Keep the emotion out of it: you are not accusing anyone, you are declining to proceed until the paperwork matches the promise.

What do I check on installation day and after?

Before the crew leaves, walk the building with them. Sight down the eave and ridge for straight lines, check that panels are lapped against the weather and screws are seated with washers intact, operate every door, confirm trim is complete at every edge, and look at the anchors against the drawings. Ask for the signed scope, the engineered drawings if any, the permit and inspection record, and a receipt marked paid. Photograph everything, including the crew's truck and the pad. If the county requires a final inspection, do not make the last payment until it passes or until the contractor has agreed in writing to correct anything the inspector flags. Keep the whole folder; it is what your insurer, lender and eventual buyer will ask for, and if a problem appears later it tells you exactly who is responsible for what.

Specifications

Verify before paying
License, insurance certificate, physical address, references
Agreement must list
Gauge, panels, doors, anchoring, drawings, installation, price validity
Payment structure
Modest deposit; balance at delivery and completed install
Closing paperwork
Lien waiver, signed scope, drawings, permit and inspection record
METCO model
Manufactures, delivers and installs; no separate builder
METCO contact
(252) 375-3651, 28 lots open Mon-Sat 9am-5pm

Common Questions

How much deposit is reasonable for a metal building?

There is no single right figure, but the principle is clear: a deposit should secure fabrication, not fund the whole job. Demanding most or all of the price before delivery is one of the most common warning signs. Ask that the balance be due at delivery and completed installation, in writing.

How do I check a contractor's license?

Licensing requirements vary by state and by the size and type of work. Where a license applies, ask for the number and look it up with the state licensing board directly. Do not rely on a printed card. If your state does not require a license for the work, insurance and a written scope matter even more.

What is a lien waiver and why do I need one?

A lien waiver is a signed statement from the installer or subcontractor that they have been paid and give up any claim against your property for that work. Collect one at final payment. Without it, an unpaid subcontractor could in some cases file a claim against your land.

Is a company that manufactures its own buildings safer to buy from?

It removes a layer. When one company roll-forms the panels, delivers the building and installs it, there is a single accountable party and a plant you can visit. That does not replace verification, but it makes the license, insurance and written-scope checks much easier to run.

What if the contractor says my county does not need a permit?

Verify it yourself. Call the county inspections office, describe the size, use and site, and ask about permits and certified engineered drawings. Requirements vary by jurisdiction and by building use. A contractor who is right will not mind; one who is wrong has just saved you a rejected building.

Can a sales lot visit serve as a check?

Yes. Standing buildings on a sales lot let you inspect panel gauge, trim, door quality and workmanship before buying, and confirm the company has a physical presence. METCO's 28 lots across NC, Upstate SC and Southwest VA are open Monday through Saturday, 9am to 5pm; the full list is at /locations/.

Get a Real Number in 24 Hours

Tell us the size, your county and what you are storing. We quote from current steel pricing β€” no obligation, and we will tell you if a different size suits you better.

Request a Quote β†’Design It in 3D